• Home
  • 2.6cc Water-cooled Mini Gasoline Engine Model with Wooden Base

2.6cc Water-cooled Mini Gasoline Engine Model with Wooden Base

44.64
        SPECIAL OFFER

          Please select all product options

          Product was out of stock

          share
          Description
          Engine Startup Steps:
          1. Check the wiring of the engine from the wooden base, then connect the fuel tank pipeline, and install AA battery (1.5v).
          2. Fill the tank with 95 # gasoline. After the filling is completed, turn the flywheel clockwise on the right side of the engine (power switch surface) for many turns. No air can be generated.
          3. Turn on the power switch and quickly rotate the flywheel clockwise on the right side of the engine (power switch surface) to start the engine.

          Precautions:
          1. If the ignition device is normal and the cylinder compression is normal, if the machine cannot start normally, it is very likely that the carburetor oil needle needs to be adjusted.
          2. After tightening the main oil needle on the carburetor, loosen 1/4 turn and start the flywheel, so that the mixing ratio of gasoline and air can reach the normal working ratio.
          3. When the machine stops, the power switch should be turned off.

          Specifications:
          Material: Brass + Stainless Steel + Wood
          Displacement: 2.6CC
          Cylinder Diameter: 13mm
          Stroke: 12mm
          Wooden Base: 150 x 120 x 30mm
          Engine: 104 x 94 x 78mm
          Product Size: 15 x 12 x 10.8cm
          Product Weight: 1400g
          Package Dimensions: 20 x 20 x 15cm
          Package Weight: 1500g
          Packing: Box

          Package Content:
          1Set x Engine Model